Opel Corsa-e – Cabin Filter Replacement (Instructions)

2 min read
Opel Corsa-e – Innenraumfilter wechseln (Anleitung)

Regular filter replacement keeps the air in your Opel Corsa-e clean, ensures the air conditioning works efficiently, and prevents your windows from fogging up. In these instructions, you’ll learn how to easily replace it yourself in just a few minutes.

Quick Check

Time required approx. 10-15 minutes
Difficulty level Medium
Installation location Passenger footwell
Tools No tools required (optional trim removal tool)
Compatible filter EDOC-1011-O
Airflow toward the rear (toward the back of the vehicle)
Manufacturer interval every 25.000-30.000 km or 24 months
EV-DOC recommendation every 15.000-20.000 km or 12-18 months

Preparation

  • Secure the vehicle: Make sure the vehicle is secured in Park (P), completely deactivated (ignition/system off), and that the ventilation/air conditioning is switched off.
  • Protection & hygiene: Place a mat or cloth under the work area to catch falling dirt. Safety glasses and a dust mask will protect you from falling dust and pollen. It is best to have a vacuum cleaner ready to vacuum out the housing before installation.
  • Lighting: Since the installation location is usually dark, we recommend using a headlamp or flashlight for the best possible visibility.
  • Tools: You do not need any tools for the replacement. A plastic trim removal tool can optionally help remove the footwell side trim.
  • Access: The filter is located in the passenger footwell, on the left next to the center console. Move the seat all the way back and recline the backrest as far as possible to create maximum working space.

Step-by-step instructions

  1. Remove the side trim / cover
    Look into the passenger footwell on the left side of the center console. If necessary, unclip the lower cover or soft carpet trim to get a clear view of the vertical filter housing.
  2. Open the filter housing cover
    The vertical filter cover is located on the center console. Squeeze the retaining tab on the cover and pull the cover forward to remove it.
  3. Remove both old filter elements
    This vehicle platform uses a double-filter set. First, pull out the upper/front filter element. Then reach into the compartment, lift the second/lower filter element, and pull it out as well.
  4. Insert the new filter elements one after the other
    First slide the new filter element into the compartment and push it down/up into the housing. Then insert the second filter element directly behind it or above it.
    ↔ Airflow: The arrows on the long sides of both filters must point toward the rear (toward the back of the vehicle)!
    💡 Pro tip: Make sure the first filter element slides cleanly into its guide rail before inserting the second one. Insert them gently to avoid bending the outer edges of the filter pleats!
  5. Close the housing & reattach the trim
    Position the filter cover and press it firmly until the retaining tab audibly clicks into place. Then press the carpet or side trim in the footwell back into its retaining clips.

Disposal instructions

To ensure that all materials from your filter change are recycled as effectively as possible and that the cycle remains closed, please dispose of them as follows:

  • Used filter: As the old filter is heavily contaminated with pollutants, particulate matter and soot, it should be disposed of in the general waste. Through thermal recovery in modern facilities, useful energy (electricity and district heating) is still extracted from it.
  • Shipping box: It’s best to put the grass paper box in the waste paper bin so that the fibres remain in the recycling cycle. Alternatively, you can dispose of it on your own garden compost heap.
  • Filter bag: The plastic-free pouch for your new EV-DOC filter is made of paper and should also be placed in the waste paper bin.
  • Labels & backing paper: You do not need to remove stickers from cardboard before putting it in the waste paper bin – they are automatically recycled along with the paper. However, if you are composting the cardboard, please remove the labels first. Individual labels and backing paper should be disposed of in the general waste because of the adhesive.

Disclaimer

These instructions are provided for guidance only. All work carried out is at your own risk and under your own responsibility. EV-DOC accepts no liability for personal injury, damage to property or consequential damage, or for vehicle faults resulting from incorrect installation or misinterpretation of these instructions. Please always follow the specific manufacturer’s guidelines for your vehicle.

Is something wrong? Leave a comment!

Please note, comments need to be approved before they are published.

Mach mit

Wir alle brauchen mal Hilfe. Lass uns wissen, bei welchem Innenraumfilter du uns (und die Community) mit Bildmaterial unterstützen kannst. Als Dankeschön erhältst du deinen Filter von uns kostenlos!

Exact model, incl. year of manufacture and drive.

Wir melden uns schnellstmöglich bei dir zurück.